Service Manual — page 691 of 715

Text on this page

APPENDIX 17-19
Cable, Wire, and Hose Routing
  1. Starter Motor Cable
  2. Install the clamps to the frame as shown.
  3. Battery Negative (–) Cable
  4. Main Harness
  5. Run the starter motor cable under the main harness.
  6. Accessory Relay
  7. Battery Positive (+) Lead Connector
  8. Battery Positive (+) Cable
  9. Clamps (Hold the main harness.)
 10. Immobilizer (Equipped Models)/Kawasaki Diagnostic System Connector
 11. Hold the fuel pump lead connector to the bracket.
 12. Hold the ABS Kawasaki diagnosis system connector to the bracket.