Owner's Manual — page 49 of 201 (printed page 47)

Text on this page

GENERAL INFORMATION 47

*No.| Indicators Status
When the ignition switch is turned off, this indicator will start blinking*?,
42 D which indicates that the immobilizer system is functioning. After 24
hours, the immobilizer warning indicator will stop blinking. However, the
immobilizer system is still functioning.
17 s When the IMU functions, this indicator goes on.
*3:

The immobilizer warning indicator blinking mode can be set to either on or off.

OTo stop the immobilizer warning indicator blinking, turn the ignition switch off

and then, within twenty seconds, push and hold the upper button and the lower
button simultaneously for more than two seconds.

OWhen the battery is connected, immobilizer warning indicator defaults to
blinking mode.

OWhen the battery voltage is low (below 12 V), the immobilizer warning indicator
automatically stops blinking to prevent excessive battery discharge.