Service Manual (KLZ1000C) — page 74 of 762

Text on this page

2-52 PERIODIC MAINTENANCE
Periodic Maintenance Procedures
    If it does not go on, inspect or replace the following parts.
      Battery (see Charging Condition Inspection(16-30))
      Brake Light (LED) (see Brake/Tail Light (LED) Re-
      moval(16-61)) (see Brake/Tail Light (LED) Installa-
      tion(16-62))
      Main Fuse 30 A and Brake Light/Horn Fuse 10 A (see
      Fuse Inspection(16-120))
      Front Brake Light Switch [A] (see Switch Inspection(16
      -111))
      Rear Brake Light Switch (see Switch Inspection(16-111))
      Harness (see Wiring Inspection(16-25))

Suspension
Suspension System Inspection
Front Forks/Rear Shock Absorber Operation Inspec-
tion
• Pump the forks down and up [A] 4 or 5 times, and inspect
  the smooth stroke.
  If the forks do not smoothly or noise is found, inspect the
  fork oil level or fork clamps (see Front Fork Oil Change(13
  -11)).

• Pump  the seat down and up [A] 4 or 5 times, and inspect
  the smooth stroke.
    If the shock absorber does not smoothly stroke or noise
    is found, inspect the oil leak.

Front Fork Oil Leak Inspection
• Visually inspect the front forks [A] for oil leakage.
  Replace any defective parts, if necessary.